Skip to content

Automobiles

Project KAHN Hammerhead RS wheels for INEOS Grenadier

Project KAHN has engineered the Hammerhead RS Forged alloy wheels for the INEOS Grenadier, drawing on Dakar Rally styling with a lightweight forged construction and satin black finish. At £2,000 for a set of four, these 20-inch wheels combine rally inspired design with the strength needed for serious off road capability.

Enter the world of Project KAHN
LISTEN TO THIS ARTICLE 4 MIN LISTEN
READY

AI-assisted voice playback. Starts only when you choose Play.

Project KAHN Hammerhead RS-Forged alloy wheel in satin black, 20-inch diameter, displaying the distinctive central apertures and outer rim detail inspired by Dakar Rally design
Project KAHN (@projectkahn)

Project KAHN, the British wheel specialist, has engineered the Hammerhead RS wheels for the INEOS Grenadier, drawing the design from desert racing and constructing them in forged alloy rather than cast. The 20-inch wheels cost £2,000 per set of four and sit flush with the Grenadier’s standard brake and suspension geometry without modification, fitting 2023 and later models directly onto existing bolts.

INEOS Grenadier finished in British Racing Green with satin black Hammerhead wheels fitted, photographed in three-quarter view against a brick building

The construction method is the discovery here. Forging compresses the alloy under extreme pressure, aligning its grain structure to build density at the stress points: mounting points and spoke transitions. This matters because forged wheels weigh less than cast equivalents, which reduces unsprung mass and alters how acceleration, braking and suspension response perform across rough ground. The lighter rotational inertia changes the vehicle’s behaviour, which is why Project KAHN offers technical guidance to owners making the transition from stock steel wheels.

Close detail of Hammerhead wheel fitted to INEOS Grenadier with all-terrain tyre, showing spoke structure and satin black finish against tyre sidewall

The visual language descends from Dakar Rally machinery. Bold central apertures and a distinctive outer rim detail signal the engineering beneath. The satin black finish is functional too: the matte treatment resists glossy swirl marks under photography and integrates the wheels into the Grenadier’s industrial stance rather than reading them as decoration. The centrepiece sits flush with the rim profile, allowing standard OEM centre caps to fit without protrusion.

Hammerhead wheel profile detail showing the outer rim reinforcement and spoke geometry under studio lighting

The fitment is a 9 by 20 inch dimension front and rear, preserving the original PCD and bolt pattern. Project KAHN validated clearance against the Grenadier’s stock brake assemblies and suspension articulation limits. The wheels work with existing OEM bolts and centre caps, dropping straight on without requiring suspension modifications or brake repositioning.

INEOS Grenadier front quarter with Hammerhead wheels emphasising the wheel diameter and stance

The price reflects the manufacturing precision required. Forging demands tighter tolerances than casting, and the finish work carries the costs of surface preparation and application. At £2,000 per set, the wheels suit owners planning genuine expedition work: terrain where these wheels encounter the thermal stress, impact loading and sustained speed that the Dakar demands.

Hammerhead wheel detail showing central hub and bolt pattern against satin finish

The Dakar reference runs deeper than styling. That rally operates across terrain that destroys ordinary wheels through thermal stress, impact loading and sustained high speed runs across broken ground. The engineers at Project KAHN studied those conditions and designed backwards from them. The spoke geometry distributes load vectors across the full width of the wheel face rather than concentrating force at traditional stress points. The rim profile features subtle reinforcement along the bead seat, the zone where the tyre interface experiences its harshest forces.

INEOS Grenadier side profile with Hammerhead wheels, parked on gravel with architectural backdrop

These wheels suit owners who plan to use the Grenadier as it was intended: across terrain where tarmac represents intermission rather than the main event. The combination of lightweight construction, rally bred design language and precision engineering creates something that performs equally well on Scottish moorland, North African sand or mountain passes where the road disappears into rock and dust. Function drives form here, which is precisely why the form matters.

Close angled view of Hammerhead wheel on Grenadier showing spoke apertures and rim depth

The wheels ship ready to fit, and work with existing OEM bolts and centre caps, simplifying the installation process. For owners of 2023 and later Grenadiers, the fitment drops straight onto the existing brake and suspension assemblies without requiring modifications. Project KAHN offers technical guidance for those moving from stock steel wheels to understand the handling implications of the lighter, slightly different rotational mass characteristics that forged alloys deliver.

Full frontal view of INEOS Grenadier with Hammerhead RS-Forged wheels, displaying wheel-to-arch proportion and design integration

Imagery courtesy of Project KAHN (@projectkahn).

INEOS Grenadier finished in British Racing Green with satin black Hammerhead wheels fitted, photographed in three-quarter view against a brick building
Close detail of Hammerhead wheel fitted to INEOS Grenadier with all-terrain tyre, showing spoke structure and satin black finish against tyre sidewall
Hammerhead wheel profile detail showing the outer rim reinforcement and spoke geometry under studio lighting
INEOS Grenadier front quarter with Hammerhead wheels emphasising the wheel diameter and stance
Hammerhead wheel detail showing central hub and bolt pattern against satin finish
INEOS Grenadier side profile with Hammerhead wheels, parked on gravel with architectural backdrop
Close angled view of Hammerhead wheel on Grenadier showing spoke apertures and rim depth
Full frontal view of INEOS Grenadier with Hammerhead RS-Forged wheels, displaying wheel-to-arch proportion and design integration

Stay inspired

Join the world of Simply Luxury.

Curated stories, exceptional places and private invitations.

Story Index